|
PILNCCB
|
One
type N.C. normally closed contact block, stackable
|
|
PILNOCB
|
One
type N.O. normally open contact block, stackable
|
|
PILCLHCOV1
|
One clear Hinged cover fits all one device/push button model series and one-two
device/Power Control series, provision for padlock/seal. May also be used/aligns
with standard 4" X 4" wall box
(Note 1
)
|
|
PILCLHCOVA
|
Same
as PILCLHCOV1 but fitted with audible alarm and inscrition "Alarm Sound
When Cover Is Raised"(Notes
1, 8)
|
|
PILCLHCOVRP
|
Same
as above but with inscription "Raise Lid - Push Button"(Note
1)
|
|
PILCLHCOVRO
|
Same
as above but with inscription "Raise Lid - Operate Switch"(Note
1)
|
|
PILRPCOV
|
One
replacement Front Cover for operator or control station, with standard
legend, specify model series/number
|
|
PILRPCOVSL
|
One
replacement Front Cover for operator or control station, with Specific
Legend (specify), specify series/number
|
|
PILPBSRP
|
Solid
"Raise lid-Push button" lid only, for use with PILYF/PILDF
flush device, lockable/sealable(Note
1)
|
|
PILPBSRR
|
Solid
"Raise lid-Release button" lid only, for use with PILYX
extended device, lockable/sealable(Notes
7)
|
|
PILPBSCP
|
Same
as PILPBSRP but with transapernt lid , for
use with PILYF/PILDF flush device, lockable/sealable(Notes
3, 5, 6)
|
|
PILPBSCR
|
Same
as PILPBSRR but with transapernt lid , for
use with PILYX extended device, lockable/sealable (Notes
3, 5, 6)
|
|
PILCLM
|
One
Clear Hinged Lockout Lid, for 40mm mushroom and other devices, 22mm (7/8") hole opening
|
|
PILCLM-30
|
One
Clear Hinged Lockout Lid, for 40mm mushroom and other devices, 30mm (1-3/32") hole opening
|
|
PILDLM
|
Same
as PILCLM but prevents single mushroom (including
momentary) from being released/extended (Note 2)
|
|
PILCLMA
|
Same
as PILCLM but fitted with switch that actuates
remote audible or visual indicator when hinged lockout lid is raised (Notes
2, 9)
|
|
PILDLMA
|
Same
as PILDLM but fitted with switch that actuates
remote audible or visual indicator when hinged lockout lid is raised (Notes
2, 9)
|
|
PILGM
|
One
guard for all 40 mm mushroom models (standard and suffix MO/TW/KR)
and PILMP/PILTW/PILKR/PILMO devices, lockable
|
|
PILYF
|
Momentary
Round Push Button, red (standard), flush head (Notes
5, 6)
|
|
PILYX
|
Momentary
Round Push Button, red (standard), extended head (Notes
5, 6)
|
|
PILDF
|
Maintained
Round Push Button (Push On- Push Off), red (standard), flush head (Notes
5, 6)
|
|
PILDX
|
Maintained
Round Push Button (Push On- Push Off), red (standard), extended head (Notes
5, 6)
|
|
PILMO
|
Red
Momentary 40mm Mushroom (Note 5)
|
|
PILMP
|
Red
Maintained 40mm Mushroom, "Pull To Reset" (Push - Pull) (Note
5)
|
|
PILTW
|
Red
Maintained 40mm Mushroom, "Turn To Reset" (Push - Turn To Release)
|
|
PILKR
|
Red
Key Release 40mm Mushroom with two keys, key required to reset only
|
|
PILRPKEY
|
One
replacement key for key operated device ( specify type and key number
)
|
|
PILRPLMP
|
Pkg.
five extra incandescent Lamps for suffix IL
models, 120V (standard,
Note 5)
|
|
PILRPLNE
|
Pkg.
five extra Neon Lamps for suffix IL
models, 120V (standard,
Note 5)
|
|
PILRPLED
|
Pkg.
five extra LEDs for suffix
IL models, 24-120V AC/DC (standard,
Note 6)
|
|
PILRRPIN
|
One
Pin device for securing suffix RR/CR "Raise lid - Release button"
devices in the closed position, nonlockable
|
|
PILRRLCK
|
One
Lock and key for securing suffix RR/CR "Raise lid - Release button"
devices in the closed position, lockable
|
|
PILEPOPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY POWER OFF -PUSH
BUTTON
|
|
PILEPOPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick,
EMERGENCY
POWER OFF -PUSH
BUTTON
|
|
PILSLPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing, SPECIFIC
LEGEND -PUSH
BUTTON
|
|
PILSLPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick, SPECIFIC
LEGEND -PUSH
BUTTON
|
|
PILFSOPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY FUEL SHUT-OFF -PUSH
BUTTON
|
|
PILFSOPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick,
EMERGENCY
FUEL SHUT-OFF -PUSH BUTTON
|
|
PILEGSPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY GENERATOR STOP -PUSH
BUTTON
|
|
PILEGSPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick, EMERGENCY
GENERATOR STOP -PUSH BUTTON
|
|
PILHVACPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY HVAC SHUT-DOWN -PUSH
BUTTON
|
|
PILHVACPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick,
EMERGENCY HVAC SHUT-DOWN -PUSH
BUTTON
|
|
PILESPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY STOP -PUSH
BUTTON
|
|
PILESPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick,
EMERGENCY STOP
-PUSH BUTTON
|
|
PILESOPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY SHUT-OFF
-PUSH BUTTON
|
|
PILESOPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick,
EMERGENCY
SHUT-OFF -PUSH
BUTTON
|
|
PILBSDPLT
|
Face
Plate only 4"X 4" aluminium, self-adhesive backing,
EMERGENCY BOILER SHUT-DOWN - PUSH BUTTON
|
|
PILBSDPLTF
|
Face
Plate only 5"X 5" aluminium, 1/8" thick, EMERGENCY
BOILER SHUT-DOWN - PUSH BUTTON
|
|
PILNGENC
|
One
type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without
holes, with internal ground post and compresion lug 4X4X2.5 inch deep,
grey color
|
|
PILNYENC
|
Same
as PILNGENC but safety yellow color
|
|
PILHGENC
|
One
type 4X4X12/3 nonmetallic enclosure with gasketed screw cover, single
7/8" (22mm) hole in center of cover, with internal ground post and
compresion lug 4X4X2.5 inch deep, grey color
|
|
PILHYENC
|
Same
as PILHGENC but safety yellow color
|
|
PILXDENC
|
One
type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without
holes, Extra Depth: 4X4X4.5 inch deep
|
|
PILSDENC
|
One
type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without
holes, Super Depth: 4X4X6.5 inch deep
|
|
*NOTE:
|
For
Electrical ratings, see CONTACT BLOCK CHARACTERRISTICS page 75. Operator
are rated NEMA 4/12 (outdoor/indoor use).
|
|
*NOTE 1:
|
Lockable/sealable
covers for use in accordance with applicable codes and requirements. If
no locking/sealing capability is desired for PILCLHCOV1, specify "No
Tab" following catalog number
|
|
*NOTE 2:
|
PILCLM
compatible with all mushroom devices except suffix JM,
and with keyed selector devices PILK1-K11
with and without key insrted. PILDLM is for
use with type MP/MO/TW/KR mushroom devices
only and must be lifted in order: to automatically release/extend a momentary
mushroom device type MO, or; to manually
release/extend a maintained mushroom device type MP/TW/KR.
For use in accordance with applicable codes and requirements.
|
|
*NOTE 3:
|
For
momentary operation of accessory PILRP/PILCP,
use momentary operator PILYF. For maintained
operation of accessory PILRP/PILCP, use maintained
operator PILDF.
|
|
*NOTE 5:
|
If
illumination feature isdesired, add suffix IL
to model number. Includes 24 - 120V AC/DC
protected LED (standard). Superbright protected
LED also available - add addendum SB to suffix IL and specify voltage.
Illumination available with model PIL__: YF/YX/DF/DX/MO/MP
devices. Incandescent or neon lamp also available on model PIL__:
YF/YX/DF/DX devices - add indicated addendum to suffix IL
and specify voltage: IC for incandescent
or NE for neon (Note
6)
|
|
*NOTE 6:
|
Illuminated
(suffix IL) model PIL__: YF/YX/DF/DX devices
are available in lens colors other than (standard) red. Add appropriate
addendum to suffix IL as indicated:
LC = Clear; LG = Green; LA = Amber; LB
= Blue
|
|
*NOTE 7:
|
Accessories
PILRR/PILCR "Raise lid-Release button"
require the use of a device (not included) as pin/lockout/tagout/seal
to secure the RR/CR lid in the closed position
over the (comressed) type PILYX extended
head round operator. When device is removed, the type YX
operator release/extends, raising the lid. The operator is maintained
in the extended position until the lid is reclosed and secured. See accessories
PILRPPIN and PILRRLCK.
|
|
*NOTE 8:
|
Must
be ordered with (any series) push button station/not available for field
installation. Includes audible alarm with protected On/Off microswitch.
Alarm sounds when cover is raised, unless microswitch is "Off"
position (maintenance).
|
|
*NOTE 9:
|
Must
be ordered with (any series) push button station/not available for field
installation. Includes audible alarm and pull pin with brass chain.
|
