PILNCCB

One type N.C. Normally Closed Contact Block, stackable

PILNOCB

One type N.O. Normally Open Contact Block, stackable

PILCLHCOV1

One clear Hinged cover fits all one device/push button model series and one-two device/Power Control series, provision for padlock/seal. May also be used/aligns with standard 4" X 4" wall box (Note 1)

PILCLHCOVRP

Same as above but with inscription "Raise Lid - Push Button" (Note 1)

PILCLHCOVRO

Same as above but with inscription "Raise Lid - Operate Switch" (Note 1)

PILCLHCOVK

Same as PILCLHCOV1 but with keyed lock and key (Note 1)

PILCLHCOVA

Same as PILCLHCOV1 but fitted with audible alarm and inscrition "Alarm Sound When Cover Is Raised (Notes 1, 11)

PILRPCOV

One replacement Front Cover for operator or control station, with standard legend, specify model series/number

PILRPCOVSL

One replacement Front Cover for operator or control station, with Specific Legend (specify), specify series/number

PILPBSRP

Solid "Raise lid-Push button" lid only, for use with PILYF/PILDF flush device, lockable/sealable (Note 8)

PILPBSRR

Solid "Raise lid-Push button" lid only, for use with PILYX/PILDX extended device, lockable/sealable (Note 8, 9)

PILPBSCP

Same as PILPBSRP but with transapernt lid , for use with PILYF/PILDF flush device, lockable/sealable (Notes 8)

PILPBSCR

Same as PILPBSRR but with transapernt lid , for use with PILYX/PILDX extended device, lockable/sealable (Notes 8, 9)

PILCLO

One Clear Hinged Lockout lid for single device only, for use with PILYF/PILYX/PILDF/PILDX/PILPT devices, selector switch devicesp
PILP1-P6, keyed selector devices PILSK1-K11 and in custom applications, lockable/sealable (Note 2)

PILCLM

One clear Hinged Lockout lid for single device, for use with model PILK1-P11 keyed selector devices, PIL__:MP/MO/TW/KR mushroom devices and custom applications, lockable/sealable (Note 2)

PILDLM

Same as PILCLM but prevents single mushroom (including momentary) from being released/extended (Note 2)

PILCLMA

Same as PILCLM but fitted with switch that actuates audible alarm when hinged lockout lid is raised (Notes 2, 12)

PILDLMA

Same as PILDLM but fitted with switch that actuates audible alarm when hinged lockout lid is raised (Notes 2, 12)

PILGR

One guard forPILYF/PILYX/PILDF/PILDX round push button

PILGM

One guard forPILMP/PILTW/PILKR/PILMO 40 mm mushroom, lockable

PILRSB

Two Clear Silicon Boot Cover for two round push buttons (for Model Series MNST, MNSTL, MST1 and SWLPB)

PILSSB

Single Clear Silicon Boot Cover for dual square push buttons (for Model Series MST2 and MST3)

PILNCMN

One specialty type N.C. Normally Closed Contact Block, stackable (for Model Series MNST and MNSTL only)

PILNOMN

One specialty type N.O. Normally Open Contact Block, stackable (for Model Series MNST and MNSTL only)

PILB1

Audible Alarm, 80 decibel output continuous/intermittant, 120Vac, 60Hz supply

PILB2

Audible Alarm, 80 decibel output continuous/intermittant, 230-240Vac, 50Hz supply

PILB3

Audible Alarm, 80 decibel output continuous/intermittant, 12-24Vdc, 50/60Hz supply

PILBI

One push button/other device inscription: Blank (Note 10 )

PILCI

One push button/other device inscription:Custom (Specify) (Note 10 )

PILTG

Two position maintained Toggle switch

PILYF

Momentary Round Push Button, red (standard), flush head (Note 5)

PILYX

Momentary Round Push Button, red (standard), extended head (Note 5)

PILDF

Maintained Round Push Button (Push On- Push Off), red (standard), flush head (Note 5)

PILDX

Maintained Round Push Button (Push On- Push Off), red (standard), extended head (Note 5)

PILMO

Red Momentary 40mm Mushroom (Note 5)

PILMP

Red Maintained 40mm Mushroom, "Pull To Reset" (Push - Pull) (Note 5)

PILTW

Red Maintained 40mm Mushroom, "Turn To Reset" (Push - Turn To Release)

PILKR

Red Key Release 40mm Mushroom with two keys, key required to reset only

PILRPKEY

One replacement key for key operated device ( specify type and key number )

PILRPLMP

Pkg. five extra incandescent Lamps for suffix IL models, 120V (standard)

PILRPLNE

Pkg. five extra Neon Lamps for suffix IL models, 120V (standard)

PILRPLED

Pkg. five extra LEDs for suffix IL models, 24-120V AC/DC (standard)

PILRPPIN

One Pin device for securing suffix RR/CR "Raise lid - Release button" devices in the closed position, nonlockable

PILRRLCK

One Lock and key for securing suffix RR/CR "Raise lid - Release button" devices in the closed position, lockable

PILPC

Lens Cap only for pilot light red (standard) (Note 6)

PILPL

Pilot Light, red (standard) (Notes 4, 6)

PILPF

Flashing Pilot, red (standard), LED only (Notes 4, 6, 7)

PILPT

Push to Test Pilot, red (standard) (Notes 4, 6, 7)

PILP1

Two position Selector Switch, maintained both positions, short lever (Notes 3, 5)

PILP2

Two position Selector Switch, maintained left, momentary right, short lever (Notes 3, 5)

PILP3

Three position Selector Switch, maintained all positions, short lever (Notes 3, 5)

PILP4

Three position Selector Switch, maintained center, momentary left/right, short lever (Notes 3, 5)

PILP5

Three position Selector Switch, maintained right/center, momentary left, short lever (Notes 3, 5)

PILP6

Three position Selector Switch, maintained right/center, momentary right, short lever (Notes 3, 5)

PILK1

Two position Keyed Selector with two keys, maintained both positions, key removal left

PILK2

Two position Keyed Selector with two keys, maintained both positions, key removal left/right

PILK3

Two position Keyed Selector with two keys, maintained left, momentary right, key removal left

PILK4

Three position Keyed Selector with two keys, maintained all positions, key removal center

PILK5

Three position Keyed Selector with two keys, maintained all positions, key removal left/right

PILK6

Three position Keyed Selector with two keys, maintained all positions, key removal left

PILK7

Three position Keyed Selector with two keys, maintained all positions, key removal all positions

PILK8

Three position Keyed Selector with two keys, momentary left/right, maintained center, key removal center

PILK9

Three position Keyed Selector with two keys, momentary left, maintained right/center, key removal right

PILK10

Three position Keyed Selector with two keys, momentary right, maintained left/center, key removal center

PILK11

Three position Keyed Selector with two keys, momentary left, maintained right/center, key removal left

PILBL

Inscription Plate Carrier for all Selector Switches or Keyeded Selectors, small blank lettering plate for 2/3 positions

PILCL

Inscription Plate Carrier for all Selector Switches or Keyeded Selectors, same as above but with custom letter (specify)

PILNGENC

One type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without holes, with internal ground post and compresion lug 4X4X2.5 inch deep, grey color

PILNYENC

Same as PILNGENC but safety yellow color

PILHGHENC

One type 4X4X12/3 nonmetallic enclosure with gasketed screw cover, single 7/8" (22mm) hole in center of cover, with internal ground post and compresion lug 4X4X2.5 inch deep, grey color

PILHYENC

Same as PILHGENC but safety yellow color

PILXDENC

One type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without holes, Extra Depth: 4X4X4.5 inch deep

PILSDENC

One type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without holes, Super Depth: 4X4X6.5 inch deep

*NOTE:

For Electrical ratings, see CONTACT BLOCK CHARACTERISTICS page 75. Operator are rated NEMA 4/12 (outdoor/indoor use).

*NOTE 1:

Lockable/sealable covers for use in accordance with applicable codes and requirements. If no locking/sealing capability is desired, specify "No Tab" following catalog number

*NOTE 2:

Note PILCLO compatible with selector switch devices P1-P6, and keyed selector switch devices K1-K11 without key inserted only. PILCLM compatible with type K1-K11 devices with and without key inserted. unlike suffix CLM, suffix DLM is for use with type MP/MO/TW/KR mushroom devices only and must be litfed in order: toautomatically release/extend a momentary mushroom device type MO, or: to manually release/extend a maintained mushroom device type MP/TW/KR. For use in accordance with applicable codes and requirements.

*NOTE 3:

Short lever only.

*NOTE 4:

Includes 24V-120V AC/DC protected LED (standard - specify other voltage). superbright protected LED also available - add addendum SB and specify voltage. Model PIL__:PL/PF/PT devices and illuminated (suffix IL) versions of model PIL__: YF/YX/DF/DX devices are aslo available with incandescent or neon lamp - add the indicated addendum : IC for incandescent or NE for neon (120V lamp standard - specify other voltage). Note LED only on PILPF device

*NOTE 5:

If illumination feature is desired, add addendum IL to model number (except PIL__PL/PF/PT. Illumination available with model PIL__:YF/YX/DF/DX/MO/MP/P1-P6 devices but note LED only on illuminated (suffix IL) versions of model PILP1-P6/PILMO/PILMP devices. Illumination not available on model PILTW/PILKR/PILK1-K11 devices (Notes 4, 6)

*NOTE 6:

Model PIL__:PL/PF/PT devices and illuminated (suffixIL) versions od model PIL__:YF/YX/DF/DX devices avaialble in lens colors other than (standard) red. Illuminated (sufix IL) versions of model PIL__:P1/P2/P3/P4/P5/P6IL devices are available in lens colors other than (standard) clear. Add appropriate addendum to suffixPL/IL as indicated: LC = Clear; LG = Green; LA = Amber; LB = Blue

*NOTE 7:

Model PIL__:IL/PF/PT devices require the use of a 3" deep metal or 4" deep (suffix XD) nonmetallic backbox

*NOTE 8:

For momentary operation of accessory PILRP/PILCP, use momentary operator PILYF. For maintained operation of accessory PILRP/PILCP, use maintained operator PILDF.

*NOTE 9:

Accessories PILRR/PILCR "Raise lid-Release button" require the use of a device (not included) as pin/lockout/tagout/seal to secure the RR/CR lid in the closed position over the (comressed) type PILYX extended head round operator. When device is removed, the type YX operator release/extends, raising the lid. The operator is maintained in the extended position until the lid is reclosed and secured. See accessories PILRPPIN and PILRRLCK.

*NOTE 10:

Tex may be of face of device or in inscription/lettering carrier above device

*NOTE 11:

Must be ordered with (any series) push button station/not available for field installation. Includes audible alarm with protected On/Off microswitch. Alarm sounds when cover is raised, unless microswitch is "Off" position (maintenance).

*NOTE 12:

Must be ordered with (any series) push button station/not available for field installation. Includes audible alarm and pull pin with brass chain.