|
SERIES PIL |
ACCESSORIES,CONTACT BLOCKS,REPLACEMENT PARTS AND COMPONENTS FOR ALL BULLETIN 120.1 SERIES OPERATOR STATIONS |
|
One type N.C. normally closed contact block, stackable | |
|
One type N.O. normally open contact block, stackable | |
|
One clear Hinged cover fits all push button stations and for console / panel applications | |
|
One clear Hinged Lockout lid for single device, for use with model PILK1-K11 keyed selector devices, PIL__:MP/MO/TW/KR mushroom devices and incustom applications, lockable/sealable (Note 2) | |
|
Same as PILCLM but prevents single mushroom (including momentary) from being released/extended (Note 2) applications | |
|
Same as PILCLHCOV1 but fitted with audible alarm and inscrition "Alarm Sound When Cover Is Raised (Notes 1, 8) | |
|
One Clear Hinged cover fits all series ST120 break glass station only, lockable/sealable (Note 3) | |
|
Same as PILCLHCOV5 but fitted with audible alarm and inscription "Alarm Sound When Cover Is Raised" (Notes 3, 7) | |
|
PILRPLMP |
Pkg. five extra lamps for all suffix IL models, 120V standard ( specify others ) |
|
PILRPKEY |
One replacement key for key operated device ( specify type and key number ) |
|
PILSTDSGLS |
Pkg. two extra glasses for ST120 series only |
|
PILSTRPHMR |
One replacement hammer and chain for ST120 series only |
|
PILPBSRP |
Padlockable solid raise lid only, for use with PILMOPB in console / panel applications |
|
PILPBSCP |
Padlockable clear raise lid only, for use with PILMOPB in console / panel applications |
|
PILMOPB |
Momentary round push button, red color standard, specify flush or extended head |
|
PILMOMS |
Momentary red 40mm mushroom, for replacement or console / panel application |
|
PILMNMS |
Maintained "Pull to Reset" red 40mm mushroom, for replacement or console / panel application |
|
PILMNTW |
Maintained "Turn to reset" Red 40mm mushroom, for replacement or consol / panel application |
|
PILMNKR |
Key Release 40mm mushroom with two keys, key required to reset after operation |
|
PIL2KMN/L |
Two position Key Operator with two keys, maintained both position, key removal left |
|
PIL2KMN/LR |
Two position Key Operator with two keys, maintained both position, key removal left / right |
|
PIL2KMNLMOR/L |
Two position Key Operator with two keys, maintained left, momentary right,key removal left |
|
PIL3KMN/C |
Tree position Key Operator with two keys, maintained all position, key removal center |
|
PIL3KMN/LR |
Tree position Key Operator with two keys, maintained all position,key removal left / right |
|
PIL3MN/L |
Tree position Key Operator with two keys, maintained all position, key removal left |
|
PIL3KMN/LRC |
Tree position Key Operator with two keys, maintained all position, key removal all positions |
|
PIL3KMOLRMNC/C |
Tree position Key Operator with two keys, momentary left / right, maintained center, key removal center |
|
PIL3KMOLMNRC/R |
Tree position Key Operator with two keys, momentary left, maintained right / center, key removal right |
|
PIL3KMORMNLC/C |
Tree position Key Operator with two keys, momentary right, maintained left / center, key removal center |
|
PIL3KMORMNLC/L |
Tree position Key Operator with two keys, momentary right, maintained left / center, key removal left |
|
PILIPCBL |
Inscription plate carier for all Key Operators, small blank lettering plate for 2/3 positions |
|
PILIPCCL |
Inscription plate carier for all Key Operators, same as above but with custom lettering ( specify ) |
|
PILFSOPLT |
Face plate only, 4"x4"aluminium, self-adhesive backing "Emergency Fuel Shut-Off-Push Button" |
|
PILFSOPLTF |
Face plate only, 5"x5"aluminium, 1/8"thick "Emergency Fuel Shut-Off - Push Button" |
|
PILEGSPLT |
Face plate only, 4"x4"aluminium, self-adhesive backing "Emergency Generator Stop-Push Button" |
|
PILEGSPLTF |
Face plate only, 5"x5"aluminium, 1/8"thick "Emergency Generator Stop - Push Button" |
|
PILEPOPLT |
Face plate only, 4"x4"aluminium, self-adhesive backing "Emergency Power Off-Push Button" |
|
PILEPOPLTF |
Face plate only, 5"x5"aluminium, 1/8"thick "Emergency Power Off - Push Button" |
|
PILHVACPLT |
Face plate only, 4"x4"aluminium, self-adhesive backing "Emergency HVAC Shut-Down-Push Button" |
|
PILHVACPLTF |
Face plate only, 5"x5"aluminium, 1/8"thick "Emergency HVAC Shut-Down - Push Button" |
|
PILSLPLT |
Face plate only, 4"x4"aluminium, self-adhesive backing "Specific Legend(Specify)-Push Button" |
|
PILSLPLTF |
Face plate only, 5"x5"aluminium, 1/8"thick "Specific Legend(Specify) - Push Button" |
|
*NOTE 3: |
Operators are rated NEMA 4/12 ( outdoor/indoor use ) |
MODELS SERIES ST120PB,ST120SL,FS120,GS120 AND HVAC120 use a push button standard operating mode.Standard models use a maintained ( push-pull ) red 40mm mushroom operator hot stamped "Pull to Reset" on the mushroom face.For a momentary mushroom, add suffix MO to the desired standard model.For a maintained "Turn to Reset" mushroom, add suffix TW.SuffixRP/CP stations use a round MOMENTARY push button as standard; use suffix RP2 / CP where maintained ( push on-push off ) operation is desired.Type PILNCCB/PILNOCB contact block accessories ( sold separately ) remain CLOSED / OPEN in the normal state and OPEN / CLOSE when the push button operator is depressed.Contact blocks are stackable and may be used in any combination subject to the capacity of the backbox used: 1-2 blocks for standard nonmetallic backbox; 1-4 blocks for standard metal backbox ( see description at model series headings ).Suffix XD Extra Depth models accept up to 6 contact blocks. Suffix SO Super Depth models accept up to 10 contact blocks.
MODEL SERIES ST120 uses a "Break Glass to Release Button" standard operating mode in which the operator automatically releases and is maintained when the glass is broken with the attached hammer.Optional suffix BP versions use a "Break Glass - Push Button" operating mode in which the the button must be manually depressed after the glass is broken.Unless specified otherwise, "Break Glass - Push Button" station will be supplied with suffix BP1 ( momentary ) operator as standard.For maintained operation of "Break Glass - Push Button" models, specify suffix BP2. Suffix TG / P1 / P3 / K1 / K4 "Break Glass - Operate Switch models will be supplied with maintained devices ( all position ) unless specified othrtwise.Using the standard operating mode, type PILNCCB / PILNOCB contact blocks remain OPEN / CLOSED when the glass is intact and CLOSE / OPEN when the glass is broken and the button releases. ( Contact block operation of optional suffix BP1 / BP2 / TG / P1 / P3 / K1 / K4 models is direct: type PILNCCB / PILNOCB contact blocks remain closed / open when the glass is intact and open / close when the glass is broken and the device actuated. )Suffix XD Extra Depth models accept 1 - 8 contact blocks.