ACCESSORIES,CONTACT BLOCKS, REPLACEMENT PARTS AND COMPONENTS FOR ALL BULLETIN 120 SERIES OPERATOR STATIONS


SERIES PIL


ACCESSORIES, CONTACT BLOCKS, REPLACEMENT PARTS AND COMPONENTS FOR BREAK GLASS OPERATOR STATIONS: SERIES WPS

>

PILNCCB

One type N.C. Normally Closed Contact Block, capacity three blocks per device, stackable (Note 1)

PILNOCB

One type N.O. Normally Open Contact Block, capacity three blocks per device, stackable (Note 1)

PILWPCOV

One clear Hinged cover fits all one device model series WPS operator stations, provision for padlock/seal (Note 5)

PILWPCOVA

Same as PILCLHCOV but fitted with audible alarm and inscrition "Alarm Sound When Cover Is Raised (Notes 4, 5)

PILWPLT

Brushed Stainless Steel wall plate only, for flush mounting over standard one-gang wall box, with center or off-center (specify) hole for mounting any series WPS or PIL device

PILCLO

One Clear Hinged Lockout lid for single device only, for use with WPS__:YF/YX/DF/DX models, WPSPT model, WPSP1-P6 models,
WPSK1-K11 models, and in custom applications, lockable/sealable (Note 2)

PILCLM

One clear Hinged Lockout lid for single device only, for use with WPS__:MO/MP/TW/KR mushroom models and WPS__:PILK1-K11 devices and in custom applications, lockable/sealable (Note 2, 6)

PILDLM

Same as PILCLM but prevents single mushroom (including momentary) from being released/extended (Note 2, 6 )

PILBI

One push button/other device inscription: Blank (Note 3)

PILCI

One push button/other device inscription:Custom (Specify) (Note 3)

PILBL

Inscription Plate Carrier for all Selector Switches or Keyed Selectors, small blank lettering plate for 2/3 positions

PILCL

Inscription Plate Carrier for all Selector Switches or Keyed Selectors, same as above but w/ custom lettering (specify)

PILRPKEY

One replacement key for key operated device ( specify type and key number )

PILRPLMP

Pkg. five extra incandescent Lamps for suffix IL models, 120V (special - specify voltage)

PILRPLNE

Pkg. five extra Neon Lamps for suffix IL models, 120V (special - specify voltage)

PILRPLED

Pkg. five extra LEDs for suffix IL models, 24-120V AC/DC (specify other voltage)

PILRRPIN

One Pin device for securing suffix RR/CR "Raise lid - Release button" devices in the closed position, nonlockable

PILRRLCK

One Lock and key for securing suffix RR/CR "Raise lid - Release button" devices in the closed position, lockable

*NOTE 1:

Subject to capacity of wall box used.

*NOTE 2:

Note accessories PILCLO is compatible with selector switch devices P1-P6, and keyed selector switch device K1-K11 without key inserted only. Accessory PILCLM is compatible with type K1-K11 devices with and without key inserted, and with mushroom devices MO/MP/TW/KR. Suffix DLM is for use with type MP/MO/TW/KR mushroom devices only and must be lifted in order: to automatically release/extend a momentary mushroom device type MO, or; to manually release/extend a maintained mushroom device type MP/TW/KR. For use in accordance with applicable codes and requirements.

*NOTE 3:

Tex may be of face of device or in inscription/lettering carrier above device

*NOTE 4:

Must be ordered with (any series) push button station/not available for field installation. Includes audible alarm with protected On/Off microswitch. Alarm sounds when cover is raised, unless microswitch is "Off" position (maintenance).

*NOTE 5:

For use in accordance with applicable codes. If no locking/sealing capability is desired on PILWPCOV, specify "No Tab".

*NOTE 6:

For "Alarm Sound When Cover Is Raised" version of type CLM/DLM devices, add addendum "A" tocatalog number. Includes audible alarm and pull pin with brass chain. Must be ordered with (any series) push button station/not available for field installation. For use with double gang wall box (not supplied).



PILLA ELECTRICAL PRODUCTS,INC....4076 St.Augustine Rd.....Jacksonville,FL 32207-6661 USA...tel(904) 396-7371....fax (904) 396-1391

Back to PIL ACCESSORIES

Back to main page

Go to List and information page