PILNCCB

One type N.C. normally closed contact block, stackable

PILNOCB

One type N.O. normally open contact block, stackable

PILCLHCOV1

One clear Hinged cover fits all one device/push button model series and one-two device/Power Control series, provision for padlock/seal. May also be used/aligns with standard 4" X 4" wall box (Note 1)

PILCLHCOVRP

Same as above but with inscription "Raise Lid - Push Button" (Note 1)

PILCLHCOVRO

Same as above but with inscription "Raise Lid - Operate Switch" (Note 1)

PILCLHCOVA

Same as PILCLHCOV1 but fitted with audible alarm and inscrition "Alarm Sound When Cover Is Raised" (Notes 1, 8)

PILRPCOV

One replacement Front Cover for operator or control station, with standard legend, specify model series/number

PILRPCOVSL

One replacement Front Cover for operator or control station, with Specific Legend (specify), specify series/number

PILPBSRP

Solid "Raise lid-Push button" lid only, for use with PILYF/PILDF flush device, lockable/sealable (Note 3)

PILPBSRR

Solid "Raise lid-Release button" lid only, for use with PILYX extended device, lockable/sealable
(Note 7)

PILPBSCP

Same as PILPBSRP but with transapernt lid , for use with PILYF/PILDF flush device, lockable/sealable (Notes 3, 5, 6)

PILPBSCR

Same as PILPBSRR but with transapernt lid , for use with PILYX extended device, lockable/sealable (Notes 3, 5, 6, 7)

PILCLM

One clear Hinged Lockout lid for single device, for use with standard and suffix MO/TW/KR mushroom models, type PILP1-P6 selector devices, type PILk1-K11 keyed selector devices and custom applications, lockable/sealable (Note 2)

PILDLM

Same as PILCLM but prevents single mushroom (including momentary) from being released/extended (Note 2)

PILCLMA

Same as PILCLM but fitted with switch that actuates audible alarm when hinged lockout lid is raised (Notes 2, 9)

PILDLMA

Same as PILDLM but fitted with switch that actuates audible alarm when hinged lockout lid is raised (Notes 2, 9)

PILGM

One guard for all 40 mm mushroom models (standard and suffix MO/TW/KR) and PILMP/PILTW/PILKR/PILMO devices, lockable

PILYF

Momentary Round Push Button, red (standard), flush head (Notes 5, 6)

PILYX

Momentary Round Push Button, red (standard), extended head (Notes 5, 6)

PILDF

Maintained Round Push Button (Push On- Push Off), red (standard), flush head (Notes 5, 6)

PILDX

Maintained Round Push Button (Push On- Push Off), red (standard), extended head (Notes 5, 6)

PILMO

Red Momentary 40mm Mushroom (Note 5)

PILMP

Red Maintained 40mm Mushroom, "Pull To Reset" (Push - Pull) (Note 5)

PILTW

Red Maintained 40mm Mushroom, "Turn To Reset" (Push - Turn To Release)

PILKR

Red Key Release 40mm Mushroom with two keys, key required to reset only

PILRPKEY

One replacement key for key operated device ( specify type and key number )

PILRPLMP

Pkg. five extra incandescent Lamps for suffix IL models, 120V (standard Note 5)

PILRPLNE

Pkg. five extra Neon Lamps for suffix IL models, 120V (standard Note 5)

PILRPLED

Pkg. five extra LEDs for suffix IL models, 24-120V AC/DC (Note 5)

PILRRPIN

One Pin device for securing suffix RR/CR "Raise lid - Release button" devices in the closed position, nonlockable

PILRRLCK

One Lock and key for securing suffix RR/CR "Raise lid - Release button" devices in the closed position, lockable

PILEPOPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY POWER OFF              -PUSH BUTTON

PILEPOPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY POWER OFF              -PUSH BUTTON

PILSLPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, SPECIFIC LEGEND                          -PUSH BUTTON

PILSLPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               SPECIFIC LEGEND                          -PUSH BUTTON

PILFSOPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY FUEL SHUT-OFF        -PUSH BUTTON

PILFSOPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY FUEL SHUT-OFF        -PUSH BUTTON

PILEGSPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY GENERATOR STOP    -PUSH BUTTON

PILEGSPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY GENERATOR STOP    -PUSH BUTTON

PILHVACPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY HVAC SHUT-DOWN    -PUSH BUTTON

PILHVACPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY HVAC SHUT-DOWN    -PUSH BUTTON

PILESPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY STOP                         -PUSH BUTTON

PILESPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY STOP                         -PUSH BUTTON

PILESOPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY SHUT-OFF                  -PUSH BUTTON

PILESOPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY SHUT-OFF                  -PUSH BUTTON

PILBSDPLT

Face Plate only 4"X 4" aluminium, self-adhesive backing, EMERGENCY BOILER SHUT-DOWN - PUSH BUTTON

PILBSDPLTF

Face Plate only 5"X 5" aluminium, 1/8" thick,               EMERGENCY BOILER SHUT-DOWN - PUSH BUTTON

PILNGENC

One type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without holes, with internal ground post and compresion lug 4X4X2.5 inch deep, grey color

PILNYENC

Same as PILNGENC but safety yellow color

PILHGENC

One type 4X4X12/3 nonmetallic enclosure with gasketed screw cover, single 7/8" (22mm) hole in center of cover, with internal ground post and compresion lug 4X4X2.5 inch deep, grey color

PILHYENC

Same as PILHGENC but safety yellow color

PILXDENC

One type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without holes, Extra Depth: 4X4X4.5 inch deep

PILSDENC

One type 4X4X12.3 nonmetallic enclosure with gasketed screw cover, without holes, Super Depth: 4X4X6.5 inch deep

*NOTE:

For Electrical ratings, see CONTACT BLOCK CHARACTERRISTICS page 75. Operator are rated NEMA 4/12 (outdoor/indoor use).

*NOTE 1:

Lockable/sealable covers for use in accordance with applicable codes and requirements. If no locking/sealing capability is desired for PILCLHCOV1, specify "No Tab" following catalog number

*NOTE 2:

PILCLM compatible with all mushroom devices except suffix JM, and with keyed selector devices PILK1-K11 with and without key insrted. PILDLM is for use with type MP/MO/TW/KR mushroom devices only and must be lifted in order: to automatically release/extend a momentary mushroom device type MO, or; to manually release/extend a maintained mushroom device type MP/TW/KR. For use in accordance with applicable codes and requirements.

*NOTE 3:

For momentary operation of accessory PILRP/PILCP, use momentary operator PILYF. For maintained operation of accessory PILRP/PILCP, use maintained operator PILDF.

*NOTE 5:

If illumination feature isdesired, add suffix IL to model number. Includes 24 - 120V AC/DC protected LED (standard). Superbright protected LED also available - add addendum SB to suffix IL and specify voltage. Illumination available with model PIL__: YF/YX/DF/DX/MO/MP devices. Incandescent or neon lamp also available on model PIL__: YF/YX/DF/DX devices - add indicated addendum to suffix IL and specify voltage: IC for incandescent or NE for neon (Note 6)

*NOTE 6:

Illuminated (suffix IL) model PIL__: YF/YX/DF/DX devices are available in lens colors other than (standard) red. Add appropriate addendum to suffix IL as indicated:
LC = Clear; LG = Green; LA = Amber; LB = Blue

*NOTE 7:

Accessories PILRR/PILCR "Raise lid-Release button" require the use of a device (not included) as pin/lockout/tagout/seal to secure the RR/CR lid in the closed position over the (comressed) type PILYX extended head round operator. When device is removed, the type YX operator release/extends, raising the lid. The operator is maintained in the extended position until the lid is reclosed and secured. See accessories PILRPPIN and PILRRLCK.

*NOTE 8:

Must be ordered with (any series) push button station/not available for field installation. Includes audible alarm with protected On/Off microswitch. Alarm sounds when cover is raised, unless microswitch is "Off" position (maintenance).

*NOTE 9:

Must be ordered with (any series) push button station/not available for field installation. Includes audible alarm and pull pin with brass chain.